In order to compensate for the heat expansion one side of the connector is mounted as a loose bearing. The given torques must be observed. The other side of the connector is to be mounted as a fixed bearing. A minimum distance of 4mm must be kept between the cable ladders. This article is available made in material No. 1.4571/1.4404 (V4A) stainless steel finish.
Continously hot galvanized (Sendzimir process) (DIN EN 10346)
height | length | weight | |||
---|---|---|---|---|---|
WPV 120S | 120 mm | 400 mm | 1,08 kg |
Hot-dip galvanized, according to BS 729 (DIN EN ISO 1461)
height | length | weight | |||
---|---|---|---|---|---|
WPV 120F | 120 mm | 400 mm | 1,1 kg |