Support bracket with G-profile for mesh cable trays and cable trays.

The KLTR girder clamp is used to clamp cable trays to horizontally crossing steel girders. Offset placement of the clamp prevents movement in the longitudinal direction. Two notch points on the

Spacer bar for horizontal-vertical wall fastening of mesh cable trays. Suitable for mounting on the longitudinal wires in the bottom of the mesh cablte trays G 50 and G 100 from a width of 316 mm.

One-piece latchable single isolated ground receptacle, 45x45 mm design made of plastic with 33° or 0° plugging angle, push terminals, increased contact protection according to VDE 0620 and nominal

End piece cartridge, can be adjusted to floor cover height, for the sealing of screed-flush duct.

Usable on mesh cable trays with a wire spacing of 100 mm. Universal use of the snap connector for side or bottom connections. Screwless assembly/disassembly. Backlash-free versions for Ø4 mm and Ø4.5

End piece, adjustable to floor cover height (3mm), for closing a screed-flush duct, including cross beam.

GVL mesh cable tray connector, side GVL 30-ZP GVL 30-F GVL 60-ZP GVL 60-F GVL 60-E

Opening lever as spare for plastic installation units with cable outlet.

Floor tub for screed-flush duct made of steel sheet including connector for the all-round shielded laying of cables.