Any electrical installation is designed to operate under specific conditions, such as a constant voltage and certain temperatures. When this is altered by voltage surges or dips, excessive current demand or discontinuous voltage, electrical overloads, current surges or other accidents caused by poor wiring can occur. Inclement weather, such as electrical storms, can also cause failures in this type of installation.
This can result in a variety of problems, from a simple short circuit to a fire in the worst case. Therefore, it is important to take preventive measures to avoid electrical surges, which can occur anywhere electricity is used, whether in a home, office or factory.
Preventive measures to ensure a safe space
One of the best ways to prevent electrical surges is to check that electrical appliances are connected properly. It is important to make sure that the wires are in good condition, since over time they can suffer wear and tear and end up being damaged, thus resulting in a safety hazard for the electrical installation. In addition, it is important to bear in mind that plugging too many appliances into the same socket or power strip can overload the electrical circuit.
If there are circuit breakers, which serve to protect electrical circuits from overloads, it is necessary to make sure that they are in good condition and working properly. If an electrical circuit is overloaded, the circuit breaker will automatically trip and cut off the power supply to the circuit.
It should be noted that electrical appliances and equipment have a maximum load capacity. This means that they can only withstand a certain amount of electrical energy, so it is imperative to always read the manufacturer's instructions and not to overload electrical appliances.
If these preventive measures are not taken, it is quite common for electrical overloads to occur. So how do we act if it happens? The most important thing is to act quickly to avoid major damage or injury. If an appliance, outlet, generator or machine overheats or begins to emit smoke, it is vital to unplug it immediately. And, of course, call a professional to check the electrical circuit and make the necessary repairs.
Safety in industry, construction and other infrastructures
If the electric wiring of an installation is exposed, there is a risk of technical problems caused by environmental deterioration or thermal overloads. Such technical failures are very common and can jeopardize the production of a project or construction.
Cable trays ensure the integrity of the electric wire and allow more air traffic in the channel, preventing overloads and deterioration of the electrical circuits. In addition, they protect from inclement weather, such as the temperatures to which the cabling will be exposed or the humidity of the environment and facilitate both the assembly of the cabling and its subsequent maintenance to ensure that the installation retains the best conditions.
PUK Portacables products, designed and manufactured in Germany, have certifications recognized both at German and European level, which guarantee the highest quality and safety in all its solutions.